LG LRSES2706 Series, Owner'S Manual

Page: 17 / 97

16 INSTALLATION
Adjusting the Height of
the Door
Connecting the Appliance
Moving the Appliance
If the door of the appliance is not level, adjust the
difference in the height of appliance door using
the following method.
*Reference
NOTE
• Because the hinge pin may fall out, do not
adjust the height of the appliance door more
than 5 mm.
Turn the keeper nut clockwise using the
spanner.
Remove all food from inside the appliance.
Pull the power plug out, insert and fix it into
the power plug hook at the rear or on top of
the appliance.
Tape parts such as shelves and the door
handle to prevent from falling off while
moving the appliance.
Move the appliance with more than two
people carefully. When transporting the
appliance over a long distance, keep the
appliance upright.
After installing the appliance, connect the
power plug into a socket out to switch on the
appliance.
Fasten the keeper nut by turning it
counterclockwise.
If it is impossible to adjust the height of the
appliance door through the above method,
level the door according to the following guide.
After installing the appliance, connect the
power plug into a socket outlet.
Adjust the difference in the height of the
appliance door by rotating the adjustment
hinge pin clockwise or counterclockwise with
an 8 mm spanner.
1
1
2
3
4
5
3
2
Keeper nut
Adjustment hinge pin
To loosen the nut
To tighten the nut
Down
Up
NOTE
• After connecting the power supply cord (or plug)
to the outlet, wait 2 or 3 hours before you put
food into the appliance. If you add food before
the appliance has cooled completely, your food
may spoil.