LG LRSDS2706S, Manual

Page: 31 / 68

31 OPERATION
ENGLISH
• Wax paper or wax-coated freezer wrap
• Thin, semi-permeable wrap
Drawers
Removing/Assembling Drawers
1
To remove drawers, pull them out to full
extension, lift the front, and pull straight out.
NOTE
• When removing or installing the drawer, lift the
cover to help remove or insert the drawer.
2
To assemble drawers, slightly tilt up the front,
insert into the frame and push back into
place.
CAUTION
• Use both hands to remove and assemble
drawers. The compartment is heavy when filled
with food and may cause injury if dropped.
• Open refrigerator doors fully when removing or
assembling drawers.
• You will see the water tank while removing the
Fresh Zone drawer. Do not remove the water
tank
a
or water leakage may occur. The water
tank is not a removable part.
Refrigerator Shelves
The shelves in the refrigerator are adjustable to
meet individual storage needs.
Adjusting the shelves to fit items of different
heights will make finding the exact item you want
easier.
Detaching/Assembling Shelves
CAUTION
• Do not clean glass shelves with warm water
while they are cold. Shelves may break if
exposed to sudden temperature changes or
impact.
1
To detach, remove all items from the shelf.
Lift the back of the shelf slightly to disengage
the rail stops.
2
Holding the shelf with both hands, tilt the
shelf and pull it out.
3
To assemble, tilt the front of the shelf up and
guide the shelf into the slots at a desired
height, keeping shelf holder down.
4
Slide the shelf in, then lower the front of the
shelf.
CAUTION
• Make sure that shelves are level from one side to
the other. Failure to do so may result in the shelf
falling or spilled food.
InstaView
This feature is only available on some models.