35
MAINTENANCE
ENGLISH
NOTE
• Replacing the water filter causes a small amount
of water (around 1 oz. or 25 cc) to drain.
• Wrap a cloth around the front end of the water
filter cover to collect any leaking water. Hold the
water filter upright, once it is removed, to
prevent any remaining water from spilling out of
the water filter.
3
Pull the water filter downward and turn it
counterclockwise before pulling it out. Make
sure to rotate the filter down completely
before pulling it out of the manifold hole.
4
Replace with a new water filter.
• Take the new water filter out of its packing
and remove the protective cover from the o-
rings. With the water filter tabs in the
horizontal position, push the new water
filter into the manifold hole and turn it
clockwise until it stops.
5
Close the water filter cover. The cover will click
when closed correctly.
6
After the water filter is replaced, dispense 2.5
gallons of water (flush for approximately 5
minutes) to remove trapped air and
contaminants from the system.
NOTE
• Do not dispense the entire 2.5 gallon amount
continuously. Press and release the dispenser
pad for cycles of 30 seconds ON and 60 seconds
OFF.
• Keep the water filter bypass plug. You MUST use
the water filter bypass plug when a replacement
water filter cartridge is not available.
7
After changing the filter, press and hold the
Water Filter Replace
button for three
seconds to reset the indicator light.
For further assistance, call:
• 1-800-243-0000 (USA)
• 1-888-542-2623 (Canada)
