Holes
Ribs
Tilt up the front of tray slightly and snap the ribs into the
holes to replace the tray.
Important:
If no water dispensed when the refrigerator
is first installed, there may be air in the water line system.
Press the dispenser switch for at least two minutes to
remove trapped air from the water line and to fill the
water system.
Push up
Push up the dispenser switch with a cup until you hear
click to get cold water.
Tray can be easily removed by pressing and pulling it.
Dispenser
Switch
WATER DISPENSER
6.
5.
Flush water out from the system until air gets
eliminated and water start to dispense
(approximately for 60
).*
seconds
Turn the shutoff valve on (house valve).*
NOTE:
To purchase replacement water filter cartridges,
visit your local appliance dealer or part distributor. You
can also visit our website : www.lgappliances.com or call
1-877-714-7481.
*Steps 1,2,5
6 only for models with water dispenser.
&
8.2 WATER DISPENSER
1.
2.
- 22 -
(On some models)
