- 17 -
ENGLISH
1.
Press
WARM
pad for 3 seconds.
2.
Press
“3”
pad. The display will
show
“BEEP Hi”.
3.
Press
“3”
pad to switch beeper
volume (Hi, Lo, OFF).
4.
Press
START
pad to accept the
desired change.
To set beeper volume
SETTING BEEPER VOLUME
The beeper volume feature allows you to adjust the volumes
to a more acceptable volume. There are three possible
volume levels.
1.
Press
WARM
pad for 3 seconds.
2.
Press
“2”
pad. The display will
show
“Unit F”.
3.
Press
“2”
pad to switch between
the
“F”
and
“C”.
4.
Press
START
pad to accept the
desired change.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
WARM
pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
1.
Press and hold
START
for
3 seconds.
2.
2 beeps will sound,
"DOOR
LOCKED"
will flash in the display.
Once the oven door is locked the
"DOOR LOCKED"
indicator will
stop flashing and remain on along
with the lock icon( ) light.
To activate the Oven Lockout feature:
1.
Press and hold
START
for 3
seconds. A beep will sound
2 times. The
"DOOR LOCKED"
will continue to flash until the oven
door has completely unlocked and
the lock icon( ) light will clear.
2.
The oven is again fully operational.
To reactivate normal oven operation:
SETTING OVEN LOCKOUT
F E A T U R E
The
START
pad controls the Oven Lockout feature. The
Oven Lockout feature automatically locks the oven door,
prevents the Warming Drawer and most oven controls from
being turned ON. It does not disable the clock, timer or the
interior oven light.
1.
Press and hold
WARM
pad for
3seconds.
“OPt”
will be displayed.
2.
Press
“1”
pad. The display will
show
“CLO 12H”
3.
Press
“1”
pad to switch between
the
“12H”
and
“24H”.
4.
Press
START
pad to accept the
desired change.
Changing between 12 or 24 hour time of day
CHANGING HOUR MODE ON
C L O C K(12 hr, 2 4hr )
Your control is set to use a 12-hour clock. If you would prefer
to have a 24-hour time clock, follow the steps below.
OPERATION (OPTIONS)
Summary of Contents for LRE5602SS
Page 36: ... 36 MEMO ...
