19
INSTALLATION
ENGLISH
Lift the door from the middle hinge pin and
remove the door.
Use a ¼ in (6.35 mm) hex socket wrench to
loosen the hinge pin and remove. Remove
the two allen screw using 5 mm (3/16 in) ,
the phillip screw and the hinge .
With a flat-head screwdriver, carefully pry
off and remove the cover over the bolt
holes on the left side of the refrigerator.
Remove the outer lower decorative screw
from the flange on the frame between
the freezer and refrigerator doors (You
will need this hole for the middle hinge
bracket).
Turn the middle hinge bracket upside down
and position it on the left side of the refrigera-
tor and reattach using two allen screw using 5
mm (3/16 in.) and a Phillip screw.
Reattach middle hinge pin using a ¼ in.
(6.35 mm) socket wrench.
Remove the four screws , the hinge
pin insert and the hinge pin brackets
from the bottom right side of the door.
Reinstall the hinge pin brackets , screws
and hinge pin insert on the bottom
left side of the door.
3
6
7
8
9
10
4
5
CAUTION
• Place the door, inside facing up, on a non-
scratching surface.
• The bracket has been flipped, but the hinge pin
stays in the same orientation with its hexagonal
end facing upward.
NOTE
