LG LRDC2073 Series, User Manual

Page: 12 / 36

12
2. Removing Refrigerator Handle
Remove the cap (1) and the cap (2), by using a flat
screwdriver.
Loosen the 4 screws (3), take off the handle(4).
Loosen the 2 screws (5) and remove the stopper (6), the
bush (7) and attach them on the left (on the opposite
side).
Loosen the screw (8) and remove the cap(9).
Put the connection wire (10) into the hole, and attach the
removed cap with the screw.
Loosen the screw (11), remove the cap (12).
Put out the connection wire (13) and attach the removed
cap with the screw.
Turn the handle upside down and assemble it in the
opposite side of the refrigerator door (15).
Attach the removed cap (16) and cap(17) on the right.
3. Installing Refrigerator Door
Install the middle hinge (1) on the opposite with the
screws (2) and the screws (3).
Install the pin (4) using a 1/4-inch hex-head socket
wrench.
Place the washer (5) on the middle hinge pin.
Install the door (6) so that it fits onto the middle pin.
Install the top hinge (8) cover with the screws(7).
REFRIGERATOR INSTALLATION