ENGLISH
ESP
AÑOL
FRANÇAIS
13
2. Remove bolt
and hinge-C
and take off
refrigerator door
.
Move cap
to the side not used.
Move door bracket
and screw
to the
side you wish and reinstall.
3. Move hinge-U pin
and top cover cap
.
Assemble the refrigerator door
.
Assemble hinge-C
and bolt
.
Assemble freezer door .
Assemble the hinge-L
and bolt
.
Assemble base cover
and screw
.
After Completing the job
■
Make sure that the four corners of the door
gasket are not folded. It is recommended to
apply a small amount of silicon grease on
them.
■
Adjust the leveling screw on the bottom to
the highest level so that the front side of the
refrigerator is higher than the rear side.
■
If you need assistance after switching the
direction of the door opening as shown
above, call a service center.
15
12
14
11
5
4
21
10
2
1
21
Reversing the doors is not covered by the
warranty.
NOTE
Summary of Contents for LRBP1031NI
