background image

REFRIGERATOR INSTALLATION

IMPORTANT:

Before you begin, turn the refrigerator OFF and unplug it. Remove food and any 

adjustable door or utility bins from doors.

HOW TO REVERSE DOOR OPENING DIRECT ION
(when converting from the left-opening type to right-
opening type)

1. Removing Refrigerator Door

Lift the Refrigerator door (3) slightly and remove it.

Loosen the 2 screws (9) and the 2 screws (10), and
lift off the middle hinge (11).

Use a flat tip screwdriver to pry off bottom hole cover
(7) and attach it on the right.

HOW TO REMOVE DOOR HANDLES

NOTE

: Handle appearance may vary from illustrations 

2.Removing Refrigerator Handle

Loosen the set screws (1) with the 3/32” Allen

Loosen the handle mounting fasteners (3)

wrench and remove the handle (2).

with the 1/4” Allen wrench.

Install the plug buttons (4) on the left side.

Install the handle mounting fasteners (3) 

on the right side.

4

REMOVING,REVERSING AND REPLACING REFRIGERATOR DOORS (For Drawer Type Models)

T O O L S   Y O U   M A Y   N E E D

 Hex head socket wrench

No. 2 Phillips screwdriver

Flat head screwdriver

Allen wrench

10 mm
1/4 in
3/8 in

1/4 in
3/32 in

Other Important and necessary tools are:
       1/4 inch socket wrench           10mm open-end wrench
        Adjustable wrench                  Flat 2-inch putty knife



Gently pry off the Top Hinge Cover with a flat head screwdriver

and remove (1).

Using 10 mm socket wrench, remove the 3 bolts and lift off the

Top Hinge. Set parts aside (2).

Pry off the cover (4) using a slotted screwdriver to find the 
hole screw and attach it on the right.

Loosen the screws (5), remove the stopper (6) and
attach them on the left (on the opposite side).

Using a ¼-inch socket wrench, loosen and remove 

   Hinge Pin (8) from the Middle Hinge Pin Bracket. 

   door slightly and remove it.

NOTE: 

At this point the door will be loose, lift up

8

Carefully loosen the plug buttons with your fingers (4).

The buttons can be unscrewed with your fingers, 
rotating the pieces counter clockwise, and then 
the piece will be loose and fall. The buttons were 
installed without some pressure, for this reason the 
action can be done with your forefinger or thumb 
finger or with both.  

on this page

13

Summary of Contents for LRBC20512 Series







































Reviews: