18
INSTALLATION IN CASEMENT STYLE WINDOWS
NOTE
:
The window installation kit can be used with casement windows between 18
″
and 36
″
tall.
Foam seal A
(Adhesive type)
Foam seal C
(Adhesive
type-shorter)
Joints en
mousse A
(type adhésif)
Joints en
mousse C
(plus court de
type adhésif)
Sellado con
espuma A
(tipo adhesivo)
Sellado con
espuma C
(tipo adhesivo-
más corto)
1
Cut the foam seal A(adhesive type) &
C(adhesive type-shorter) to the proper
length, and attach it to the window sash and
frame.
2
Insert the vent panel assembly, including
extension panels, if needed, into the window
opening. Make sure the rain shield is to the
outside and sloping down above the vent
hole. Extend the extension panels, if used.
Foam seal B
(Non-adhesive type)
Sellado con espuma B
(tipo adhesivo)
Joints en mousse B
(non adhésif)
4
Cut the foam seal B(Non-adhesive type) to
the window height. Stuff the foam seal B
between the glass and the window to
prevent air and insects from getting into the
room.
3
I N S TA L L AT I O N I N S T RU C T I O N S
Extension panel
(if required)
Vent
Panel
Rain shield
Type B screws
Carefully close the window. Secure the vent
panel in place with 4 type B screws, plus
one screw for each extension:
Vent panel only:
4 type B screws
Vent panel and
one extension:
5 type B screws
Vent panel and
two extensions:
6 type B screws
