5
Listening to CDs - More you can do
Pausing or restarting a CD
1
Press
B[]
on the unit during playback.
2
Press this button again to resume play.
Searching for a section within a track
Press and Hold
.
/
>
during playback and release it at the point you want
to listen to. (This function is only available for Audio CD’s.)
Skipping to another track (file)
• Press
>
to go to the next track (file).
• When the
.
is pressed once midway through a track (file), the player
returns to the beginning of that track (file). When it is pressed again, a track
is skipped each time the button is pressed.
• When you press
+10
, next 10 tracks (files) are skipped in a jump and the
next 10 th track (file) is played back.
Listening to your tracks (files) repeatedly or randomly
1
Press
REPEAT
repeatedly.
Tracks will be played back repeatedly or randomly.
2
To return to normal playback, press
REPEAT
repeatedly to select.
Note:
Depending on the conditions of the recording equipment or the CD-R/RW disc
itself, some MULTI SESSION, Mixed disc cannot be played on the unit.
Creating your own playlist
You can play up to 40 tracks on a CD in order.
1
Insert a CD and wait for it to be read.
2
Press
PROG.
in stop status.
3
Press
.
/
>
to select a track.
4
Press
PROG.
again to save and select a next track.
Repeat the step 3 - 4.
5
Press
B
B[]
to play the programmed music files.
6
To clear your selection, press
x
x
twice.
About MP3/ WMA
MP3/ WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 32 to 48 kHz (MP3), 32 to 48 kHz (WMA)
• Bit rate: 32 to 320 kbps (MP3), 40 to 320 kbps (WMA)
• CD-R physical format should be “ISO 9660/ JOLIET”
• If you record MP3/WMA files using the software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3
files.
We recommend that you use “Easy-CD Creator”, which creates an ISO
9660 file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• On CD or USB, 99 folders and 999 track, function are support
Listening to CDs
Audio CD and MP3/ WMA CD can be played back in this unit.
ON UNIT
1. Select the CD function
2. Open the CD door
3. Insert the CD :
Label facing up.
4. Close the CD door
5. Start the CD playing
6. Stop a CD playing
FUNCTION
switch
Z
PUSH OPEN
-
-
B []
x
x
LPC14-ACISLL-ENG 2/4/10 10:49 AM Page 5
