background image

Before Use

4

Safety Precautions

Handling the unit

When shipping the unit

The original shipping carton and packing materials

come in handy. For maximum protection, re-pack the
unit as it was originally packed at the factory.

T

o keep the surface clean

Do not use volatile liquids, such as insecticide spray

,

near the unit. Do not leave rubber or plastic products in
contact with the unit for a long period of time. They will
leave marks on the surface.

Cleaning the unit

To clean the cabinet

Use a soft, dry cloth. If the surfaces are extremely dirty

,

use a soft cloth lightly moistened with a mild detergent
solution. Do not use strong solvents, such as alcohol,
benzine, or thinner, as these might damage the surface
of the unit.

Notes on Discs

Handling discs

Do not touch the playback side of the disc.

Hold the disc by the edges so that fingerprints will not
get on the surface.
Do not stick paper or tape on the disc.

Storing discs

After playing, store the disc in its case.

Do not expose the disc to direct sunlight or sources of
heat, or leave it in a parked car exposed to direct 
sunlight, as there may be a considerable temperature
increase inside the car.

Cleaning discs

Fingerprints and dust on the disc can cause poor 

quality and sound distortion. Before playing, clean the
disc with a clean cloth. Wipe the disc from the center
out.

Do not use strong solvents such as alcohol, benzine,
thinner, commercially available cleaners, or anti-static
spray intended for analog records.

Notes on T

apes

Preventing record

Removing the tab(s) of the cassette (with a small 

screwdriver) will prevent accidental erasure.

To record again, cover the hole of the tab with adhesive
tape.

Side A

Tab for side B

Tab for side A

Adhesive tape.

Summary of Contents for LPC-140A













Reviews: