16
EN
4 Connecting Vent Hose
Align the tabs on the diffuser end of the vent hose to the slots in the panel assembly opening. Insert the
diffuser and push it in the Lock direction to assemble with the mounting plate.
•
If disconnected, reconnect the other end of the vent hose to the product by inserting the vent hose
into the product with the mounting ring facing out. If the hose doesn’t snap into place, rotate it
slightly so the 2 lines at the front align.
Mounting ring
(2) UnLock
lock
(1) Insert
Window gap insulation
5 Positioning Vent Hose
For best results, keep the vent hose as short and straight as possible. However, shape the diffuser end
of the vent hose into an inverted U shape just inside the window to allow any rain or condensation to
drain out the window.
8”
8”
15
.
7”
Minimum
Minimum
<Best positioning>
<inverted U shape>
<Correct Installation Position>
