- 5 -
Copyright ©2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
1.3 ELECTRONIC CONTROL
The controls will look like one of the following.
TEMP
MODE
HEAT
E/SAVE
FAN
FAN
COOL
COOL
HIGH
HIGH
LOW
LOW
TIMER
TIMER
FAN
TIMER
'
F
ON
OFF
ON
OFF
POWER
MODE
-
Push this button to cycle through the modes from COOL
→
FAN
→
HEAT
→
COOL.
- COOL
• Fan runs continually for normal cooling operation.
- ENERGY SAVER
• The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and the unit
will check the room air temperature to determine if cooling is
needed.
- FAN
• Fan operation without heating or cooling.
- HEAT
• Fan runs continually for normal heating operation.
TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, use Timer to set number of hours until shut-off.
• For your sleeping comfort, once Time is set, the Temperature setting will raise 2
°
F after 30 minutes, and once again
after another 30 minutes.
• Push Timer to cycle through the settings from 1 Hour
→
2 Hours
→
...
→
12 Hours maximum.
TEMPERATURE SETTING
• Use this button to automatically control the
temperature of the room.
The temperature can be set within a range of
54
°
F to 86
°
F by increments of 2
°
F.
• The setting appears in the display.
FAN SPEED
• Every time you push this button, it cycles through the settings as follows:
{High(F2)
→
Low(F1)
→
High(F2)
→
Low(F1)}
• To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other button.
