The
Energy Saving
feature saves energy
by
turnin
g
off the display
by pressing the Energy Saving button.
The display will automatically turn off after 5 minutes
of idleness if the clock has not been set.
If the clock has been set,then the display will not
automatically turn off.
- 11 -
USING YOUR MICROWAVE OVEN
1
. Press
Energy Saving
to
turn the display off.
2
. P
ress
Energy Saving
to
turn the display on.
COOKTOP LIGHT
The button on the bottom left of the control panel
controls the cooktop light.
To turn on, press once.
"Light" will flash in display,
then stay on.
To turn off, press button again.
"Light" will disappear from the
display.
VENT HI/LOW/OFF
The vent removes steam and other vapors from
the surface cooking area.
Press
ent
!)6&4!0;89+4()'3&&*<
twice fo
r
Low fan speed, or three times
to turn the fan off.
Press once. "Vent" will flash and
"High" will show briefly in the display.
Press twice. "Vent" will flash and
"Low" will appear briefly in the
display.
Press again and the fan
will turn off. "Vent" will disappear
from the display.
ADD 30 SEC
A time-saving button, this simplified control lets you
quickly set and start microwave cooking without the
need to
p
ress
START/Enter
.
Press
dd
ec.
4 times.
The oven begins cooking
and the display shows time
counting down.
NOTE:
If you
p
ress
dd
ec
.
,
it will add 30
seconds up to 99 min 59 seconds.
Exa
p
le: To set ADD 30 SEC for 2 min
utes.
Example: To set the Lamp for ON
1.
Press
Light On/Off.
2
.
Press
Light On/Off.
1.
Press
Vent Hi/Low
/Off.
2.
Press
Vent
Hi/Low
/Off.
TURNTABLE ON/OFF
For best cooking results, leave the turntable on.
It can be turned off for large dishes.
Press
T
urntable
O
n
/O
ff
button
to turn the turntable on or off.
NOTES:
1.
This option is not available in sensor cook, defrost,
soft
en
and melt modes.
2.
Sometimes the turntable can become hot to touch. Be
careful
when
touching the turntable during and after
cooking.
3. Do not run the oven
when
empty.
NOTE:
Turn the microwave’s vent fan on whenever
you use the oven range cooktop below it.The fan
captures smoke, steam, and odors and also prevents
the heat from the cooktop from damaging microwave
components.
If the microwave is cooking, the vent fan turns on
automatically if the sensors detect too much heat
from the cooktop. This is normal, and is designed
to prevent microwave component damage.