28
Security Menu
·
Setting a password
If you want to protect the system setup from an unauthorized user, follow the instructions below to set a
password.
You can set a password in the BIOS Setup Utility program.
·
Set Supervisor Password
A password protects your computer from unauthorized users. The factory default setup does not have a
password. A supervisor password prevents unauthorized users from changing the system setup.
a. Start the system setup utility and use arrow keys to select
Set Supervisor Password
under
Security
menu, and then press
Enter
.
b. If the following screen appears, select
Set Supervisor Password by
using arrow keys, and
Enter
.
Caution
If you forget the password, you cannot gain access to your system.
Make sure you write down the password in a safe place only you can refer to in case you forget
the password
Ch3. System information
Summary of Contents for LM40
