Open the front
panel upward
Slide
Switch
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
Open the front
panel upward
Slide
Switch
Slide Switch
FORCED
OPERATION
AUTO
RESTART
REMOTE
CONTROL
Additional features
Owner's Manual 19
ENGLISH
Operation procedures when the remote control can't be used.
Open the front panel upward and move the Slide Switch to the
Forced Operation position.
If you want to stop operation, move the Slide Switch to the Auto
Restart or the Remote Control position.
In case the power comes on again after power failure on the Forced
Operation position, the operating conditions are automatically set as
follows:
During Forced Operation, the initial mode continues.
Forced Operation
Auto restart
In case the power comes on again after a power failure, Auto
Restarting Operation is the function to operate procedures
automatically to the previous operating conditions.
If you want to use this operation, Open the front panel
upward and move the slide switch to the Auto Restart
position.
If you do not want to use this operation, move the Slide
Switch to the Remote Control position.
When you are out for a while, put the
Slide Switch on the Remote Control.
Heat pump Model
Cooling Model
Room Temp.
≥
24°C(76°F) 21°C(70°F)
≤
Room Temp. < 24°C(76°F) Room Temp. < 21°C(70°F)
Operating mode
Cooling
Cooling
Healthy Dehumidification
Heating
Indoor FAN Speed
High
High
High
High
Setting Temperature
22°C(72°F)
22°C(72°F)
23°C(74°F)
24°C(76°F)
Helpful information
Fan speed and cooling capacity.
The cooling capacity indicated in the specification is the
value when the fan speed is set to high, and the capacity will
be lower at low or medium fan speed.
High fan speed is recommended when you wish to cool the
room quickly.
High
Speed
