Specification
Power
requirements
Refer to main label.
Power
consumption
Refer to main label.
Networked standby : 0.4 W
(If all network ports are
activated.)
Dimensions
(W x H x D)
Approx. 360 mm x 60.5 mm x
299 mm
Net Weight
Approx. 2.69 kg
Bus Power Supply
(USB)
5 V
0
500 mA
Amplifier
(Total RMS output
power)
1,000 W
Design and specifications are subject to change without
notice.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by pressing the power button for more
than 5 seconds.
Replacement of battery
POWER:
This unit operates on a mains supply of 200 -
240 V ~, 50 / 60 Hz.
Wiring:
This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions below:
Warning:
A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol
6
or coloured green
or green and yellow. If any other plug is fitted, use same
rating of fuse in the plug.
Important:
The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE:
As the colours of the
wires in the mains lead of this unit may not correspond
with the coloured marking identifying the terminals in
your plug, proceed as follows: The wire which is coloured
blue must be connected to the terminal which is marked
with the letter N or coloured black. The wire which is
coloured brown must be connected to the terminal
which is marked with the letter L or coloured red.
Additional Information
LHD645-FC.DARELLC(UAE)_ENG_2435.indd 4
2015-10-07 9:35:15
