background image

11

Installation and Setup

HDMI Connection 

If you have a HDMI TV or monitor, you can connect it
to this DVD/CD Receiver using a HDMI cable.

1. Connect the HDMI OUT jack on the DVD/CD

Receiver to the HDMI jack on a HDMI compatible
TV or monitor (H).

2. Set the TV’s source to HDMI (refer to TV’s Owner’s

manual).

3. In stop mode, select HDMI mode by pressing

HDMI. Press RESOLUTION repeatedly to select
the resolution you wish to change.

Notes:

The arrow on the cable connector body should
face up for correct alignment with the connector on
the DVD/CD Receiver.

If HDMI cable is not connected, the HDMI button is
not operated.

If there is noise or lines on the screen, please
check the HDMI cable.

Not all HDCP-compatible DVI devices will work
with this DVD/CD Receiver.

If TV does not support HDCP, snow noise appears
on the screen, or picture may be vibrated.

Tip :

When you use HDMI connection, you can change the
resolution (

480

p, 720p, 1080i) for the HDMI output by

pressing RESOLUTION on the remote control.

About HDMI

HDMI (High Definition Multimedia Interface) supports
both video and audio on a single digital connection for
an easy all- digital output to an HDMI or DVI-equipped
TV.
Connection to an HDMI TV requires an HDMI cable
while connection to a DVI-equipped TV requires an
HDMI to DVI adaptor.

HDMI has the capability to support standard,
enhanced, or high-definition video plus standard to
multi-channel surround-sound audio, HDMI features
include uncompressed digital video, a bandwidth of up
to 5 gigabytes per second, one connector (instead of
several cables and connectors), and communication
between the AV source and AV devices such as
DTVs.

HDMI, the HDMI logo and High-Definition Multimedia
Interface are trademarks or registered trademarks of
HDMI licensing LLC

Resolution setting

You can change the resolution for the COMPONENT
VIDEO OUT by pressing RESOLUTION on the
Remote Control. Available resolution settings are as
shown below.

OUTPUT

Available Resolution

CONNECTION NTSC

HDMI

1920 x 1080i

VIDEO OUT

1280 x 720p
720 x 480p

COMPONENT

1920 x 1080i

VIDEO OUT

1280 x 720p
720 x 480p
720 x 480i

MONITOR OUT

720 x 480p
720 x 480i

S-VIDEO

720 x 480p
720 x 480i

Notes:

For 720p and 1080i resolution on the component
video out, only non-copy protected discs can be
played back. If the disc is copy protected, it will be
displayed at the 480p(NTSC) resolution.

1080i, 720p, and 480p do not work with the analog
video connections (MONITOR OUT & S-VIDEO
OUT).

If you change the resolution, the display MENU
(MP3/JPEG/DivX) size is changed.

If your TV does not accept your resolution setting,
abnormal picture appears on the screen.
Please read TV’s owner’s manual then set the
resolution that your TV can accept.

Caution:

Changing the resolution when the recorder is
connected with HDMI connector may result in
malfunctions. To solve the problem, turn off the
recorder and then turn it on again.

HDMI

HDMI compatible TV

H

AUDIO

L

R

HDMI OUT

HDMI OUT

Summary of Contents for LH-T9654S






























Reviews: