background image

17

Operation

Playing an Audio CD or MP3/WMA file

This unit can play Audio CDs or MP3/WMA files
recorded media.

MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media or
Audio CD, a menu appears on the TV screen. 
Press 

v

V

to select a track/file then press PLAY or

ENTER and playback starts. You can use variable
playback functions. Refer to page 15.

Tips:

Press MENU to move to the next page.

On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.

Programmed Playback 

The program function enables you to store your
favorite tracks from any disc in the receiver memory. A
program can contain 300 tracks.

1. Insert a disc.

Audio CD and MP3/WMA Discs: 

2. Select a track on the “List”, then press PROG. or

select “

(Add)” icon then press ENTER to place

the selected track on the “Program” list. Repeat to
place additional tracks on the list.

Note:

You can add all tracks in the disc. Select “

(Add All)” icon

then press ENTER.

3. Select the track you want to start playing on the

“Program” list. Press MENU to move to the next
page.

4. Press PLAY or ENTER to start. Playback begins in

the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.

5. To resume normal playback from programmed

playback, select a track of AUDIO CD (or
MP3/WMA) list and then press PLAY.

Repeat Programmed Tracks 

1. Press REPEAT when playing a disc. The repeat

icon appears.

2. Press REPEAT to select a desired repeat mode.

• TRACK: repeats the current track
• ALL: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.

Erasing a Track from “Program” List 

1. Use 

v V

to select the track that you wish to erase

from the Program list.

2. Press CLEAR. Alternatively, select “

(Delete)”

icon then press ENTER to place the selected track
on the Program list. Repeat to erase additional
tracks on the list.

Erasing the Complete Program List 

Use 

v

/

V

to select “

(Del all)”,  then press

ENTER.

Note:

The programs are also cleared when the disc is removed.

Program

List

Track1

Track2

Track3

Track4

Track5

Track6

Track7

Track8

0:00:00

1 / 12

Audio CD

Program

List

0:00:00

1 / 104

MP3   

JPEG

JPEG

Music Folder 1

Music Folder 2

Music Folder 3

Music Folder 4

Music Folder 5

Music Folder 6

Music Folder 7

Music Folder 8

MP3 / WMA disc compatibility with this player is limited
as follows:
• Sampling frequency: within 32 - 48 kHz (MP3), 

within 24 - 48kHz (WMA)

• Bit rate: within 32 - 320kbps (MP3), 40 - 192kbps (WMA)
• The DVD/CD Receiver cannot read an MP3/WMA file

that has a file extension other than “.mp3” / “.wma”.

• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software that cannot

create a file system (eg. Direct-CD) it is impossible to
playback MP3 / WMA files.We recommend that you use
Easy-CD Creator, which creates an ISO 9660 file
system.

• File names should have a maximum of 8 letters and

must incorporate an .mp3 or .wma extension. 

• They should not contain special letters such as  / ? * : “

< > l etc.

• The total number of files on the disc should be less than

999.

This DVD/CD Receiver requires discs and recordings to
meet certain technical standards in order to achieve
optimal playback quality. Pre-recorded DVDs are
automatically set to these standards. There are many
different types of recordable disc formats (including CD-R
containing MP3 or WMA files) and these require certain
pre-existing conditions (see above) to ensure compatible
playback.

Customers should note that permission is required in
order to download MP3 / WMA files and music from the
Internet. Our company has no right to grant such
permission. Permission should always be sought from
the copyright owner.

Summary of Contents for LH-T760





























Reviews: