User Manual
PAGE :
DOCUMENT No :
REG. DATE : 2019.04.03
MODEL NAME:
TWCM-K504D(LGIT)
LGSBWAC93(LGE)
REV. DATE : 2019.04.03
REV.NO : V1.0
-
Copyright
ⓒ
. 2014. All Rights Reserved.
11 / 9
<Regulatory notice to host manufacturer according to KDB 996369 D03 OEM Manual
v01>
2.2 List of applicable FCC rules
This module has been granted modular approval as below listed FCC rule parts.
-
FCC Rule parts 15C(15.247) and 15E(15.407)
2.3 Summarize the specific operational use conditions
- The OEM integrator should use equivalent antennas which is the same type and equal or less
gain then an antenna listed in 2.7 in this instruction manual.
2.4 Limited module procedures
- N/A
2.5 Trace antenna designs
- N/A
2.6 RF exposure considerations
The module has been certified for integration into products only by OEM integrators under the
following condition:
- The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is
maintained between the radiator (antenna) and all persons at all times.
- The transmitter module must not be co-located or operating in conjunction with any other
antenna or transmitter except in accordance with FCC multi-transmitter product procedures.
- Mobile use
As long as the three conditions above are met, further transmitter testing will not be required.
OEM integrators should provide the minimum separation distance to end users in their end-
product manuals.
2.7 Antennas list
This module is certified with the following integrated antenna.
- Type: FPCB antenna (Peak gain (dBi): 2.89 (Ant1) / 2.91 (Ant2))
Any new antenna type, higher gain than listed antenna should be met the requirements of FCC
rule 15.203 and 2.1043 as permissive change procedure.