LG LFX25992 series, Service Manual

Page: 7 / 95

- 7 -
3-4 FAN AND FAN MOTOR
1. Remove the freezer drawer.
2. Remove the plastic guide for slides on left side by
unscrewing phillips head screws.
3. Remove the grille assembly by removing four screws
and pulling the grille assembly forward.
4. Remove the Fan Motor assembly by loosening 3 screws
and disassembling the shroud.
5. Pull out the fan and separate the Fan Motor and Bracket
Motor.
FAN MOTOR
BRACKET
MOTOR
Shroud
Ice Fan Assembly
3-3 Door Alignment
If the level of refrigerator doors is uneven, follow the
instructions below to align the doors:
Turn the leveling legs (CCW) to raise or (CW) to lower the
height of the front of the refrigerator by using flat blade
screw driver or 11/32" wrench. Use the wrench (Included
with the User Manual) to adjust the bolt in the door hinge to
adjust the height. (CW to raise or CCW to lower the height.)
The Left refrigerator door has an adjustable nut, located on
the bottom hinge, to raise and lower them to align properly.
If the space between your doors is uneven, follow the
instructions below to align the Left door evenly: Use the
wrench (included with the Use & Care Guide) to turn the nut
in the door hinge to adjust the height To the right to raise or
to the left to lower the height.
On the other hand, The Right refrigerator door does not
have an adjustable nut. If the space between your doors is
uneven, follow the instructions below to align the Right
door:
1. With one hand, lift up the Right door you want to raise at
middle hinge.
2. With other hand, use pliers to insert snap ring as shown.
3. Insert additional snap rings until the Right door is aligned.
(Three snap rings are provided with unit.)
Up
Down