REFRIGERATOR INSTALLATION
16
Replacing Refrigerator Door:
❿
Right Door
• Lower the door onto middle hinge pin (9).
• Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever
counterclockwise to secure hinge.
• Install the grounding screw (5) and connect wire harnesses (4).
• Hook tab on door switch side of cover under edge of wire opening in cabinet top. Position cover (2) into place. lnsert and
tighten cover screw (1).
❿
Left Door
• Lower the door onto middle hinge pin (9).
• Fit top hinge (7) over hinge lever latch (8) and into place. Insert hinge lever (6) under lever latch. Rotate lever clockwise
to secure hinge.
• Install the grounding screw (5) and connect the three wire harnesses (4).
• Push the water supply tube into the hole on the top case and pull it out on the backplate.
• Insert the water supply tube (3) into the connector tube until you see only one scale mark. (Fully insert the tube over
5/8”(15mm)).
• Hook tab on door switch side of cover (2) under edge of wire opening in cabinet top. Position cover into place. Insert and
tighten cover screw (1).
9
9
Correct
Incorrect
Summary of Contents for LFC25770 Series
Page 38: ...P No MFL37933517 ...
Page 76: ...MEMO 110 ...
Page 77: ...MEMO 111 ...
Page 78: ...P No MFL37933517 ...