LG LF761S, Owner'S Manual

Page: 21 / 88

21 InstallatIon
ENGLISH Adjust the surface burner to the low
flame (Simmer) setting.
1
light all surface burners.
2
turn the knob on the burner being adjusted to
LO .
3
Remove knob.
4
Insert a thin small flat blade screwdriver into the
top plate hole(the marked hole in the image) .
top Plate Hole
Main adjustment screw
NOTE
turn screw to adjust.
5
Replace the knob.
6
test flame stability
test 1: turn knob from
HI to LO quickly. If the
flame goes out, increase the flame size and test
again.
test 2: With burner on a
“LO” setting, open
and close the oven door quickly. If the flame is
extinguished by the air current created by the
door movement, increase the flame height and
test again.
7
Repeat steps 1 to 6 for each surface burner.
Check operation of bake
burner
Automatic ignition system
to check automatic ignition of Bake burner follow the
next steps:
1
Remove all packing from inside the oven cavity.
2
Press and turn oven knob counterclockwise,
you will hear a clicking sound indicating proper
operation of the spark module.
3
Check the flame as indicted by the guide for
manual ignition.
Manual ignition system (In case of a
power outage)
to verify the ignition of the baking burner follow the
next steps:
1
Remove all packing from inside the oven cavity.
2
turn oven knob counterclockwise.
3
Apply a flame with a manual lighter or match
directly in the opening located at the oven
bottom.
4
Visually check that oven burner has ignited.
Air shutters adjustment (for
conversions)
the cooker comes from factory with air shutters
adjusted for proper air flow for lP gas.
If cooker is to be converted to gas natural, it must be
performed by a qualified technician.