LG LE6016D Owner'S Manual Download

Page: 12 / 81

Before use

Bef
or

e use

LE6016N model

There is no built-in DVD recorder at LE6016N model.

DVD Recorder: This is used for DVD backup.

LED

• Hard disk LED: This is turned on HDD is accessed.

• Power LED: This is turned on when the power is turned on.

• Network LED: This is turned on when network is connected.

• Alarm LED: This is turned on when alarm event occurs.

Navigation buttons
• At power off status, it is turned on by pressing “OK” button in some seconds.
• At power on status, instant panic recording is executed by pressing “OK” button in

some seconds.

• “SEARCH/LIVE” button is used as navigation key, when menu is shown, on the

Chapter 1 Before use other hand, it is used for switching key between SEARCH and
LIVE screen when menu not be shown.

MENU/ESC: This is used to open or close menu.

OPEN: This is used to open or close the door of DVD recorder.

MOUSE: This is used to connect mouse.

USB: This is used to connect USB external device.

CAUTION

Mouse should be connected to front side mouse port.

Summary of Contents for LE6016D


















































































Search results

Summary of Contents for LE6016D

Reviews:

Related manuals for LE6016D

Brands by name

Popular brands

LG LE6016D, Owner'S Manual

Search results

Summary of Contents for LE6016D

Reviews:

Related manuals for LE6016D

Brands by name

Popular brands