LG LDPS676 Series, Owner'S Manual

Page: 22 / 196

22 OPERATION
OPERATION
Before Using
WARNING
• To reduce the risk of fire, electric shock, or injury to persons, read the SAFETY INSTRUCTIONS before
operating this appliance.
NOTE
• Connect to the hot water supply only. The water supply temperature should be a minimum of 120 °F (49
°C) for better washing performance and shorter cycle time.
• Follow the instructions for loading the dishwasher to ensure effective cleaning.
• Remove insoluble items such as bones, toothpicks, and pieces of paper while loading the dishwasher.
Quick Start
1
Load the dishes.
• Pull each rack out and load the dishes as
described in this manual.
• Only load items that are dishwasher-safe.
• Scrape the dishes free of excess food,
bones, and any other hard, non-soluble
residue. Remove solid, burned-on scraps
from dishes prior to loading in the
dishwasher.
• Place items with deep dish bottoms at an
angle to help water run off and speed the
drying process.
• Do not load items that are not heat-
resistant or have decorative metal trim.
2
Add the detergent.
• Using the guidelines in this manual, fill the
detergent cup with the recommended
amount of detergent and close the lid. If a
prewash is desired, the recess on top of the
lid should also be filled with detergent.
3
Turn on the dishwasher.
• To turn on the display panel, press the
Power button.
4
Check the rinse aid.
• The
Rinse Aid Refill LED will flash if the
level of rinse aid in the dishwasher is low.
Add rinse aid if the level is low to maintain
the effectiveness of the dry cycle.
5
Select the cycle and options.
• Select the cycle and options that best fit the
load by referring to the Cycle Guide . The
display will show the estimated time for the
cycle and options selected.
6
Operate the dishwasher.
•
Method 1
- Press the Start button and then close the
door in less than four seconds to operate
the dishwasher. If the door is not closed
within four seconds, the white LED with
time flashes, an audible tone is heard, and
the cycle does not start.
• Method 2
- Close the door first and then press the
Start button to operate the dishwasher.
NOTE
• If the door is opened during the cycle, the
dishwasher will stop. To resume the cycle, see
methods 1 and 2 above.
• If the door is opened during the cycle and is not
closed within four seconds after selecting the
Start button, or if the door is closed without
pressing the Start button, the white LED with
time flashes, an audible tone is heard, and the
cycle does not start.
7
End of cycle.
• When the cycle is complete, a chime will
sound and the display will show
ENd
until
the door is opened or Power is pressed. To
us_main.book.book Page 22 Tuesday, July 5, 2022 1:32 PM