3-23
COMPONENT ACCESS
RESSEMBLY METHOD OF INNER DOOR
GLASS :
1. Insert one pane of glass in inner cover.
(Glass position : Surface printed with “
단면
LG”
should be placed on bottom.)
2. Insert the other pane of glass and install the
bracket on the glass.(Glass position same as
step 1.)
RESSEMBLY NOTE : When you reinstall the
Insulation around the oven door glass, make sure
that the insulation is not visible in the glass after the
door is reassembled.
RESSEMBLY METHOD OF HINGE
RECEPTACLE :
1. Cover the inner cover with the door frame.
2. Pull up the bottom of the hinge receptacle to
align the hole with the hole in the frame, then
insert and tighten the bottom screw.
3. Move the inner cover and pull the top of the
hinge receptacle to align with the hole in the
frame and insert the second screw in the hinge
receptacle.
4. The opposite hinge receptacle is assembled
using the same method.
REASSEMBLING THE UPPER DOOR GLASS & HINGE RECEPT
REASSEMBLING THE UPPER DOOR GLASS & HINGE RECEPT
ACLE
ACLE
(For the Upper Door)
(For the Upper Door)
