background image

This lightning flash with arrowhead 

symbol within an equilateral triangle 

is intended to alert the user to the 

presence of uninsulated dangerous 

voltage within the product’s enclo-

sure that may be of sufficient magni-

tude to constitute a risk of electric 

shock to persons.
The exclamation point within an 

equilateral triangle is intended to 

alert the user to the presence of 

important operating and mainte-

nance (servicing) instructions in the 

literature accompanying the product.

FCC WARNING : 

This equipment may generate 

or use radio frequency energy. Changes or modi-

fications to this equipment may cause harmful 

interference unless the modifications are expressly 

approved in the instruction manual. The user could 

lose the authority to operate this equipment if an 

unauthorized change or modification is made.

Regulatory Notices For U.S.A

This equipment has been tested and found to 

comply with the limits for a Class B digital device, 

pursuant to Part 15 of the FCC Rules. These limits 

are designed to provide reasonable protection 

against harmful interference when the equipment 

is operated in a commercial environment.

This equipment generates, uses, and can radiate 

radio frequency energy and, if not installed and 

used in accordance with the instruction manual, 

may cause harmful interference to radio com-

munications.
Operation of this equipment in a residential area is 

likely to cause harmful interference in which case 

the user will be required to correct the interference 

at his own expense.
•  A suitable conduit entries, knock-outs or glands 

shall be provided in the cable entries of this 

product in the end user.

•  Caution: Danger of explosion if battery is incor-

rectly replaced. Replaced only with the same or 

equivalent type recommended by the manufac-

turer. Dispose of used batteries according to the 

manufacturer’s instructions.

•  Holes in metal, through which insulated wires 

pass, shall have smooth well rounded surfaces or 

shall be provided with brushings.

Warning: 

Do not install this equipment in a con-

fined space such as a bookcase or similar unit.

Warning: 

Wiring methods shall be in accordance 

with the National Electric Code, ANSI/NFPA 70.

Warning: 

This is a class B product. In a domestic 

environment this product may cause radio interfer-

ence in which case the user may be required to 

take adequate measures.

Warning:

 To reduce a risk of fire or electric shock, 

do not expose this product to rain or moisture.

Caution: 

This installation should be made by a 

qualified service person and should conform to all 

local codes.

Caution:

 To avoid electrical shock, do not open the 

cabinet. Refer servicing to qualified personnel only.

Caution: 

The apparatus should not be exposed to 

water (dripping or splashing) and no objects filled 

with liquids, such as vases, should be placed on 

the apparatus.

CAUTION: 

TO REDUCE THE RISK OF 

ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE 

PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK  

DO NOT OPEN

Summary of Contents for LD120N

















Reviews: