LG LCN097HV4 Owner'S Manual Download Page 15

Owner's Manual 

15

Operating Instructions

E

N

G

L

IS

H

The up/down airflow (Vertical Airflow) can be adjusted by using the remote controller.

1. Press the ON/OFF button to start the unit.

2. Press UP/DOWN AIRFLOW button and the louvers will swing up and down. 

Press the UP/DOWN AIRFLOW button again to set the vertical louver at the desired airflow direction.

• If you press the UP/DOWN AIRFLOW button, the horizontal airflow direction is changed automatically based

on the Auto Swing algorithm to distribute the air in the room evenly and at the same time to make the human
body feel more comfortable, as if enjoying a natural breeze.

• Always use the remote controller to adjust the up/down airflow direction. Manually moving the vertical airflow

direction louver by hand, could damage the air conditioner.

• When the unit is shut off, the up/down airflow direction louver will close the air outlet vent of the system.

The left/right(horizontal) airflow can be adjusted by using the remote control.

1. Press the ON/OFF button to start the unit.

2. Press the LEFT/RIGHT AIRFLOW button and the louvers will swing left and right. Press

the Horizontal Airflow Direction Control Button again to set the horizontal louver at the
desired airflow direction.

h

Up/Down and Left/Right Airflow function isn’t shown on display of remote controller.

Left/Right Airflow Direction Control (Optional)

Up/Down Airflow Direction Control (Optional)

To cancel the Timer Setting

• If you wish to cancel all timer setting, press the SET/CLEAR button.

• If you wish to cancel each timer setting, press the 

each timer button to turn timer sleep or on or off as you want.
And then press the SET/CLEAR button aiming the remote 
controller at the signal receptor.
(The timer lamp on the air conditioner and the display will go off.)

Summary of Contents for LCN097HV4






















Reviews: