LG LCLG006 Owner'S Manual Download Page 21

Page: 21 / 117

ENGLISH

_inde

TROUBLESHOOTING

No image is displayed.

Problem

Solution

Is the power cord connected to the
product?

•

Check if the power cord is correctly plugged into the power outlet.

The ‘Unknown Product’ message appears when the product is connected.

Problem

Solution

Did you install the driver?

•

Check if the

function is supported by referring to the

graphics card user manual.

The screen image looks abnormal.

Problem

Solution

Is the screen position wrong?

•

Check if the graphics card resolution and frequency are supported by
the product. If the frequency is out of range, set to the recommended
resolution in the “Display” settings in Control Panel.

The screen is displayed abnormally.

•

The proper input source is not connected to the port. Connect a cable
that matches the input source signal.

Summary of Contents for LCLG006






















































































































Search results

Summary of Contents for LCLG006

Reviews:

LG LCLG006, Owner'S Manual, Page: 21 / 117

Search results

Summary of Contents for LCLG006

Reviews: