LG LCF810BR, Owner'S Manual

Page: 12 / 33

Operating 12
Operating
3
Operation
Basic operations
1. Turn the unit on by pressing any key on the
unit.
2. Select a source by pressing SRC.
3. Rotate the volume knob to adjust the volume
on the unit.
Or press VOLUME
W / S on the remote control.
If a source is not connected to the unit, the
source is not recognized.
,
Note
Turning off the sound
temporarily
1. Press to mute your unit. (Except CD, USB
device and SD card)
Or press MUTE on the remote control.
2. To cancel it, press again.
Or press MUTE again.
Using EQ (Equalizer)
EQ is to increase or decrease the signal strength of
audio frequencies. The function helps you to enjoy
sound more plentifully.
Press EQ on the unit. And rotate the volume knob
to select the item and press it. The indicator lights
up in the following order.
FLAT
/
XDSS+
/
POP
/
CLASSIC
/
ROCK
/
JAZZ
/
VOCAL
/
SALSA
/
SAMBA
/
REGGAE
/
RUSSY
/
USER EQ1
/
USER EQ2
You can adjust sound level to your preference.
Once you select a USER EQ1 / 2 mode and
press and hold
`
on the unit, then adjust the
sound level ((BAS (bass), MID (middle), TRB
(treble), BALANCE (left / right speaker), FADER
(front / rear speaker), SW (Subwoofer), SW-F
(Subwoofer Frequency), A-EQ (Auto EQ)), it
will be automatically stored for the currently
selected USER EQ1 / 2 mode. Refer to the "For
[SOUND] setting" for USER EQ1 / 2 mode on
the page 13.
,
Note
Checking the clock
1. Press DISP to check the clock.
2. Press it again to remove it.
Turning off the display light
1. Press and hold DISP.
2. Press and hold it again to turn it on.
Under the light-off condition, press any
key, the light is turned on and then off
automatically if you don't press it within a few
seconds.
,
Note
Resetting the unit
You can reset the unit when it does not operate
properly.
1. Detach the control panel.
Refer to page 8 to 9 for detaching the control
panel.
2. Press the RESET hole with a sharp object.
[LCS710BR / LCS710DAB] [LCF810BR / LCF810DAB]