manualshive.com logo in svg

LG LCE3610SB, Service Manual

Share
Download
LG LCE3610SB Service Manual Download Page 17

- 17 -

ELECTRICAL CONNECTIONS 

(cont.)

IF COOKTOP IS USED IN A NEW BRANCH CIRCUIT INSTALLATION (1996 NEC), MOBILE
HOME, RECREATIONAL VEHICLE, OR WHERE LOCAL CODES DO NOT PERMIT
GROUNDING TO THE NEUTRAL (WHITE) WIRE

Observe all governing codes and local
ordinances.

Disconnect the power supply.

At the circuit breaker box, fuse box or junction
box, connect appliance and power supply cable
wires as shown.

WARNING:

If connecting to a 4-wire power
supply cable electrical system, the
appliance frame connected ground
wire MUST NOT be connected to
the neutral wire of the 4-wire
electrical system.

COOKTOP INSTALLATION

Visually inspect the cooktop for damage.
Make sure all cooktop screws are tight
(see below for locations).

Carefully lower the cooktop into the counter-top
cutout, making sure not to trap any wires.

NOTE: 

Do not use caulking compound. The

cooktop must be removable, should service be
required.

INSTALLATION INSTRUCTIONS

Cable from power supply

Ground
wire

Black 
wires

Green wir

e(ground)

Cable from cooktop

UL-listed conduit
connector

Junction box

Red 
wires

White wire 
(no connection)

Screws

4-WIRE GROUNDED JUNCTION BOX

LGE Internal Use Only

Copyright © 2008 LG Electronics. Inc. All right reserved. 
Only for training and service purposes

Summary of Contents for LCE3610SB
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands