background image

5. FCC CERTIFICATION

5.1 FCC Notice

This  equipment  has  been  tested  and  found  to  comply  with  the  limits  for  a  Class  B  digital 
device,  pursuant  to  Part  15  of  the  FCC  Rules.  These  limits  are  designed  to  provide 
reasonable  protection  against  harmful  interference  in  a  residential  installation.  This 
equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used  in  accordance  with  the  instructions,  may  cause  harmful  interference  to  radio 
communications.  However,  there  is  no  guarantee  that  interference  will  not  occur  in  a 
particular  installation.  If  this  equipment  does  cause  harmful  interference  to  radio  or 
television  reception,  which  can  be  determined  by  turning  the  equipment  off  and  on,  the 
user  is  encouraged  to  try  to  correct  the  interference  by  one  or  more  of  the  following 
measures: 

- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following 
two conditions: 

(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that may cause
undesired operation of the device.
Any  changes  or  modifications  in  construction  of  this  device  which  are  not  expressly
approved  by  the  party  responsible  for  compliance  could  void  the  user’s  authority  to
operate the equipment.

Summary of Contents for LCB-003











Reviews: