LG LBC22520TT, Service Manual

Page: 7 / 49

•
Install the handle mounting screws on the
right side.
Handle Mounting
screws
Fig. 16
Hold the handle so the masking tape is at the bottom.
Align keyhole slots on the top and bottom of the
back of the handle with the screws mounted on
the front of the door.
Press the handle against the door front, making sure
that the screws go into the keyhole slots.
Grasping the handle with both hands, press it firmly
against the front of the door and slide the handle
down. This may require some force.
Screws
Keyhole slots
mounted
on back of
on door
handle
Fig. 17
3-2-1. REMOVE FREEZER DOOR
IMPORTANT: To avoid possible injury, product or
property damage, you will need two people to perform
the following instructions.
Carefully lift up the door. Remove and place it on a non
scratching surface.
Using a 13/32” 10mm socket wrench with
2”extension, loosen the 2 bolts and remove
bottom hinge from right side.
Bottom Hinge
Bracket
Bottom Hinge Pin
Fig. 18
3-2. FREEZER DOOR
Line up Top Hinge with holes in top of refrigerator.
Use the 3 bolts to replace the Hinge.
Top Hinge Pin
Fig. 18
Fig. 20
Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Hinge Pin
Fig. 19
- 7 -