7-1 OPERATION PRINCIPLE
7-1-1 Operation Principle of IceMaker
7. OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER
- 17
-
1. Turning the Icemaker stop switch off (O) stops the ice making function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
• Adjusts EJECTOR to
Start Position
with power on
Start Position
Ice Making
Mode
Harvest
Mode
Park Position
Fill
•
Test Mode
Waits until water becomes cold after starting the
ice making operation.
• Runs MOTOR to drop ice from the tray into the ICE BIN.
• Performs
Ice Making Mode
after supplying water by operating
the SOLENOID in ICE VALVE.
• To operate LINE and SERVICE, press and hold the
Fill Key
for 3 seconds. The ice maker will run through 3 stages:
Harvest Fill Icemaking
.
• With the detect lever, checks if the ICE BIN is full.
Power (On/ Off) Switch
Fill Key
Power on.
