Connecting Cables between Indoor Unit and Outdoor Unit
Installation Manual
21
ENGLISH
Connecting Cables between Indoor Unit and Outdoor Unit
■
Connect the wires to the terminals on the control board individually according to the outdoor unit
connection.
• Ensure that the color of the wires of outdoor unit and the terminal No. are the same as those of
indoor unit respectively
■
48K/60K Btu
• Arrange 2 power cables on the control panel.
• First, fasten the steel clamp with a screw to the inner boss of control panel.
• For the cooling model, fix the other side of the clamp with a screw strongly.
For the heat pump model, put the 0.75mm
2
cable(thinner cable) on the clamp and tighten it with a
plastic clamp to the other boss of the control panel.
• In Australia, the length of power supply cord measured from the entry of the power supply cord to
the middle of live pin on the power plug should be over 1.8m.
The power cord
connected to the outdoor unit should be
complied with the following specifications (Rubber
insulation, type H05RN-F approved by HAR or SAA).
If the supply cord is damaged, it must be replaced by a special cord or assembly availible from the manufacturer of its service agent.
The connecting cable
connected to the indoor and outdoor
unit should be complied with the following specifications
(Rubber insulation, type H05RN-F approved by HAR or SAA).
CAUTION
20mm
GN/YL
NORMAL
CROSS-SECTIONAL
AREA 0.75mm
2
(18k/24k/30k/36k/42k)
1.25mm
2
(48k/60k)
20mm
GN/YL
Capacity
48k Btu/h
60k Btu/h
1 Phase
8.5mm
2
8.5mm
2
3 Phase
5.5mm
2
5.5mm
2
NORMAL CROSS-SECTIONAL AREA
• Cooling & Heating type
• Cooling only type
Terminals on the indoor unit
1
2
4
5
3
Terminals on the outdoor unit
1
2
4
5
3
Terminals on the indoor unit
1
2
4
5
3
Terminals on the outdoor unit
1
2
4
5
3
POWER INPUT
POWER INPUT
(220V)
(220V 3~)
1(L)
R
S
T
2(N)
LB-H48BESG0, LB-C48BESG0
LB-H60BESG0, LB-C60BESG0
LB-H482ESG0, LB-C482ESG0
LB-H602ESG0, LB-C602ESG0
Connecting cables to the Indoor Unit
Clamping of cabls
CAUTION: Make sure that the screws of the terminal fixed tightly.
Summary of Contents for LB-C482ESG0
Page 26: ...26 Ceiling Duct Type Air Conditioner Memo ...
Page 27: ...P No 3828A20463A ...
