background image

CAR CD/MP3/WMA Receiver

3

Safety Note

This lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage
within the product’s enclosure that may be of sufficient magnitude to consti-
tute a risk of electric shock to persons. 

The exclamation point within an equilateral triangle is intended to alert the
user to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the product.

Always operate the vehicle in a safe manner. 
Do not become distracted by the vehicle while driving, and always be fully
aware of all driving condition. Do not change settings, or any functions.
Pull over in a safe and legal manner before attempting such operations.

Do not use for many hours at extremely low or high temperature. 
(-10~60

°

C)

To reduce the risk of electric shock, do not remove the cover or back of
this product. There are no user-serviceable parts inside. 
Refer servicing to qualified service personnel.

To reduce the risk of fire or electric shock, do not expose this product to
dripping or splashing water, rain, or moisture.

The temperature of unit’s outside can be extremely high, please use the
unit after proper installation in your vehicle.

This unit cannot play 8cm disc (use 12cm disc only).

CAUTION : TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT SPLIT COVER(OR BACK) NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING

TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK 

DO NOT OPEN

CAUTION : 

This product uses a Laser System.

To ensure proper use of this product, please read this owner’s manual carefully
and retain it for future reference. 
Should the unit require maintenance, contact an authorized service center.
Performing controls, adjustments, or carrying out procedures other than those
specified herein may result in hazardous radiation exposure.
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible
laser radiation when open. DO NOT STARE INTO BEAM.

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it

means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of separately

from the municipal waste stream via designated collection facilities
appointed by the government or the local authorities.

3. The correct disposal of your old appliance will help prevent potential

negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance,

please contact your city office, waste disposal service or the shop where
you purchased the product.

Caution

When being connected in a wrong way, the unit displays as follows.
1. Antenna port short : “

ANTENNA ON PORT SHORT CIRCUIT CHECK

2. Remote port short : “

REMOTE ON PORT SHORT CIRCUIT CHECK

3. Antenna port and Remote port short : “

ANTENNA REMOTE ON PORT
SHORT CIRCUIT CHECK

After connecting it again, restart the unit.

You have to set the disc format option to [Mastered] in order to make the
discs compatible with the LG players when formatting rewritable discs.
When setting the option to Live File System, you cannot use it on LG players.
(Mastered/Live File System : Disc format system for Windows Vista)

8 cm

Summary of Contents for LAC5800R













Reviews: