ENG
CAR CD/MP3/WMA
Receiver
11
T
roubleshooting
Symptom
Cause
Correction
Power doesn’t turn on /
The
unit doesn’t operate.
No sound is heard /
The vol-
ume level will not rise.
There’
s audio skipping.
The playback is not possi
ble.
The unit does not operate
correctly even when the
appropriate remote
control buttons are pressed.
• Leads and connectors are not properly
.
•
The fuse is blown.
• Noise and other factors are causing the built-
in microprocessor to operate incorrectly
.
• Cables are not connected correctly
.
•
This unit is not firmly secured.
•
The disc is dirty
.
•
The loaded disc is of a type this unit cannot
play
.
• Battery power is low
.
• Confirm once more that all connections are
correct.
• Rectify the problem that caused the fuse to
blow
, and then replace it. Be very sure to
install the correct fuse with the same rate.
•
T
urn the unit of
f and then on.
• Connect the cables correctly
.
• Secure this unit firmly
.
• Clean disc.
• Check what type the disc.
• Load new battery
.
General
CD
Remote
