8
CAR CD/MP3/WMA Receiver
Basic operation - more you can do
Mute
Press
PWR/MUTE
to cut the sound. To cancel it, press again.
Changing the general settings
1 Press
MENU
so that one of menu items appears
.
2 Press
MENU
and press
+
or
-
to select one of the settings specified belows.
3 Press and hold
MENU
finish the setting.
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
AUX (Auxiliary) 00dB / +6dB
You can adjust the volume level of each source to prevent radical changes
in volume when switching between sources.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF/ ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listen to a source.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press
XDSS/EQ
repeatedly. The
indicator lights up in the following order.
POP
t
CLASSIC
t
ROCK
t
OFF(Not displayed.)
Note
When XDSS+ is set to “Off”, you can adjust the EQ settings.
Adjusting the sound level
Press
SEL
repeatedly to select the mode you want to adjust from volume, bal-
ance and fader.
Note
When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS,
TRB) settings.
XDSS+
(Extreme Dynamic Sound System)
Press and hold
XDSS/EQ
for more 2 seconds
. (
XDSS+ : Improves the treble,
bass sound.)
Checking the clock
You can see the clock pressing
DISP.
Setting the clock
1 Press the
DISP
and then, press and hold
DISP
for more 1 second.
2 Press the < to adjust the hour.
3 Press the > to adjust the minute.
Basic Operation
ON PLAYER
1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
PWR/MUTE
SRC
or -
