8
CAR CD/MP3/WMA Receiver
Basic operation - more you can do
Mute
Press
PWR/MUTE
to cut the sound. To cancel it, press again.
Changing the general settings
1 Press and hold
SEL/MENU
so that one of menu items appears
.
2 Press
SEL/MENU
and press + or - to select one of the settings specified
belows.
3 Press and hold
SEL/MENU
finish the setting.
AF(Alternative frequency) ON / OFF
When the reception quality drops, the tuner automatically changes to anoth-
er station in the network, broadcasting a better reception quality, using the
PI and AF codes.
REG (Region) ON / OFF
REG ON : The unit switches to another station, within the same network,
broadcasting the same program when the receiving signals from the current
station become weak.
REG OFF : The unit switches to another station, within the same network
when the receiving signals from the current station become weak. (This
mode, the program may differ from the one currently received.)
TA(Traffic Announcement) ALARM / SEEK
TA ALARM : When a newly tuned station has no TP information for 5 sec-
onds, a double beep sound is output.
TA SEEK : When the newly tuned station does not receive TP information
for 5 seconds, the receiver retunes to the next station which has the same
PI as the last station, but has the TP information.
PI (Programme Identification) SOUND / MUTE
PI SOUND : If the sound of a station with different PI is heard intermittently,
the receiver mutes the sound after 1 second. PI MUTE : If the sound of a
station with different PI is heard intermittently, the receiver mutes the sound
right now.
AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this unit. Activate the auxiliary
setting when using auxiliary equipment connected to this unit.
AUX (Auxiliary) 00dB / +6dB
You can adjust the volume level of each source to prevent radical changes
in volume when switching between sources.
You can set to 0 dB or +6 dB. You may be surprised at a loud sound when
you change the source from the external component to another source.
DEMO OFF/ ON
You can change the initial indication on the display to information name
(function name, EQ name, etc...) while listen to a source.
BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is long pressed. (1 sec)
BEEP ALL : The beep is generated when any key is pressed.
Using the EQ
EQ is to increase or decrease the signal strength of audio frequencies. The func-
tion helps you to enjoy sound more plentifully. Press
XDSS/EQ
repeatedly. The
indicator lights up in the following order.
POP
t
CLASSIC
t
ROCK
t
OFF(Not displayed.)
Note
When XDSS+ is set to “Off”, you can adjust the EQ settings.
Adjusting the sound level
Press
SEL/MENU
repeatedly to select the mode you want to adjust from vol-
ume, balance and fader.
Note
When EQ and XDSS+ is set to “Off”, you can adjust the sound level (BAS,
TRB) settings.
XDSS+
(Extreme Dynamic Sound System)
Press and hold
XDSS/EQ
for more 2 seconds
. (
XDSS+ : Improves the treble,
bass sound.)
Checking the clock
You can see the clock pressing
DISP.
Basic Operation
ON PLAYER
1. Turn the unit on.
2. Select a source.
3. Adjust the volume.
PWR/MUTE
SRC
or -
