LG LA200RA, Owner'S Manual

Page: 12 / 23

12
FAN SPEED SELECTOR
For increased power while cooling or heating, select a higher fan speed.
Cooling Model: 3 steps{High[F3]
➔
Low[F1]
➔
Med[F2]
Heating Model: 2 steps{High[F2]
➔
Low[F1]
TEMPERATURE CONTROL
The thermostat monitors room temperature to maintain the desired temperature.
The thermostat can be set between 16°C~30°C (61°F~86°F).
The unit takes an average of 30 minutes to adjust the room temperature by 1°C (1.8F).
AUTO SWING BUTTON (available in some models)
Allows the unit to automatically swing its louvers left and right during operation. If the option is
de-selected, the louvers will stop in their last position and orient the airflow in the corresponding direction.
REMOTE SENSOR
7
6
5
4
Push out the cover on the back of the remote control with your thumb
Pay attention to polarity and insert two new AAA 1.5V batteries.
Reattach the cover.
3
2
1
In case the power comes on again after a power failure, Auto Restarting Operation is the function to operate
procedures automatically to the previous operating conditions.
Do not use rechargeable batteries. Make sure that both batteries are new.
• In order to prevent discharge, remove the batteries from the remote control if the air
conditioner is not going to be used for an extended period of time
Keep the remote control away from extremely hot or humid places.
To maintain optimal operation of the remote control, the remote sensor should not be
exposed to direct sunlight.
• The remote control can be mounted on a wall using the mountable holder.
NOTICE
Inserting the Remote Control Batteries (AAA size)
Auto Restart