background image

aPPLIcatIon GuIdeLIneS   |   35

Application Guidelines

Due to our policy of continuous product innovation, some specifications may change without notification.

 

© 

LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG ” is a registered trademark of LG Corp.

outdoor unit clearances

PlACemenT ConSiderATionS

minimum Clearance requirements for Single-zone Art Cool Premier Systems

Proper clearance for the outdoor unit coil is critical for proper unit operation. When installing the outdoor unit, consider service, inlet and 

outlet and minimum allowable space requirements as illustrated in the diagrams below.

Specific clearance requirements in the diagram below are for the single-zone Art Cool Premier wall mount systems. Figure 12 shows the 

overall minimum clearances that must be observed for safe operation and adequate airflow around the outdoor unit.

Figure 12: outdoor Unit Clearances.

Outdoor Unit Clearance

12

28

24

12

24

Unit : inch

When placing the outdoor unit under an overhang, awning, sunroof or other “roof-like structure”, observe the clearance requirements (as 

shown in Figure 13) for height in relation to the unit. This clearance ensures that heat radiation from the condenser is not restricted around 

the unit.

Adhere to all clearance requirements if installing the unit on a roof. Be sure to level the unit and ensure that the unit is adequately anchored. 

Consult local codes for rooftop mounting requirements.

Do not place the unit where animals and/or plants will be in the path of the warm air, or where the warm air and/or noise will disturb neighbors.

Figure 13: outdoor Unit Sunroof/Awning Clearances.

More than

12

More than

12

Sunroo

f

Fence or

obstacle

s

More than

28

Unit : inch

More than

24

Minimum

28

Minimum

12

ODU Service Access & Clearances

Unit: Inch

In order to have successful service access to the out door unit, see Figure 14 for minimum spacing. When installing multiple outdoor units, 

see Figure 15 for correct spacing requirements.

Minimum

Minimum

12

79

24

28

Unit: Inch

Multiple ODUs 

Service Access & Clearances

Figure 14: oDU Service Access Clearance - Single Unit.

Figure 15: oDU Service Access Clearance - Multiple Units.

Summary of Contents for LA090HYV1

















































Reviews: