LG L224WS, User Manual

Page: 7 / 22

A6
2.
Press button on the front switch panel to turn the
power on. When monitor power is turned on, the
'Self Image Setting Function' is executed automatically.
Connecting the Display
NOTE
‘ Self Image Setting Function’? This function provides the user with optimal display settings.When
the user connects the monitor for the first time, this function automatically adjusts the display to
optimal settings for individual input signals.
‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen
flicker or tilted screen while using the device or after changing screen resolution, press the
AUTO/SET function button to improve resolution.
Power Cord
1
2
Varies according to model.
Signal Cable
Wall-outlet type
MAC
PC
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed
to change the 15 pin high density (3 row) D-sub VGA
connector on the supplied cable to a 15 pin 2 row connector.
Using the Computer
1.
Make sure to turn off the computer and product.
Connect Signal cable and Power cord in order, then tighten the screw of the
signal cable.
1
2
A
B
Connect Dsub Cable (PC).
Connect Dsub Cable (Mac)
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard
compliance for the product.