- 14 -
Copyright
ⓒ
2008 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
A
IBM
9
6
Video Signal
Compatible PC
5
1
Generator
15
11
10
6
5
1
C
Not used
PARALLEL PORT
13
1
RS232C
25
14
OFF
ON
Control Line
PARALLEL
5V
C
F
Power inlet (required)
5V
220
4.7K
VGS
POWER
Power Select Switch
ON
4.7K
5V
(110V/220V)
A
MONITOR
ST
E
Power LED
74LS06
V-SYNC
OFF
4.7K
74LS06
E ST Switch
B
B
F V-Sync On/Off Switch
(Switch must be ON.)
Figure 1. Cable Connection
SERVICE OSD
1) Turn off the power switch at the front side of the display.
2) Wait for about 5 seconds and press MENU, POWER switch with 1 second interval.
3) The SVC OSD menu contains additional menus that the User OSD menu as described below.
a) Auto Color : W/B balance and Automatically sets the gain and offset value.
b) NVRAM INIT : EEPROM initialize.(24C08)
c) CLEAR ETI : To initialize using time.
d) AGING : Select Aging mode(on/off).
e) R/G/B-9300K : Allows you to set the R/G/B-9300K value manually.
f) R/G/B-6500K : Allows you to set the R/G/B-6500K value manually.
g) R/G/B-Offset : Allows you to set the R/G/B-Offset value manually.(Analog Only)
h) R/G/B-Gain : Allows you to set the R/G/B-Gain value manually.(Analog Only)
i) MODULE : To select applied module.
