14
Installing and Composition
Selecting input mode
1. Press the
INPUT
button on the remote control.
2.
Selecting an input signal with the
INPUT
button will only change the projector only to connected inputs. You
can change it to any inputs with the
ᯧ
,
ᯓ
button.
• The component input is always active, and it does not support plug &play function.
• You can use this function through the
MENU
button.
Input
TV
Video
Component
RGB
HDMI
Turning on the Projector
1. Make sure the power cord is connected correctly.
2.
Press the
POWER
button on the top cover or the
POWER
button on the remote control. (The light on the
control panel will be turned on.)
• Press
the
INPUT
button on the remote control to select the input signal you want.
•
When you press the
POWER
button on the remote control or the
POWER
button on the control panel when you
turn on the projector, the lights for all buttons on the control panel will be turned on.
• Check if the lens door is open before turning on the power.
Turning off the Projector
Press the
POWER
button on the top cover or the
POWER
button on the remote control.
When an image appears on the screen, check if it is in focus and fits the screen properly.
• To adjust the focus of the image, rotate the focus ring.
Focus ring
Focus and Position of the Screen Image
