![LG HT306TQ Owner'S Manual Download Page 20](http://html.mh-extra.com/html/lg/ht306tq/ht306tq_owners-manual_213599020.webp)
System Setting
20
S
ys
tem Se
tting
3
AUDIO
5.1 Speaker Setup
Make the following settings for the built-in 5.1
channel surrounds decoder.
1. Press
SETUP
.
2. Use
WS
to select AUDIO menu and then press
D
.
3. Use
WS
to select [5.1 Speaker setup] menu
and then press
D
.
4. Press
ENTER
The [5.1 Speaker setup] appears.
5. Use
AD
to select the desired speaker.
6. Adjust options using
WSAD
buttons.
7. Press
RETURN
to confirm your selection. Return
to the previous menu.
[Speaker]
Select a speaker that you want to adjust.
y
Certain speaker settings are prohibited by
the Dolby Digital licensing agreement.
,
Note
[Size]
Since the speaker settings are fixed, you cannot
change the settings.
[Volume]
Press
AD
to adjust the output level of the
selected speaker.
[Distance]
After you connected speakers to your unit,
set the Distance between the speakers and
your listening point if the distance of Center
or Rear speakers is bigger than the distance
of Front speakers. This allows the sound from
each speaker to reach the listener at the same
time. Press
AD
to adjust the Distance of the
selected speaker. This distance is equivalent to
a difference of the distance between Center or
Rear speaker and Front speakers.
[Test]
Press
AD
to test the signals of each speaker.
Adjust the volume to match the volume of test
signals memorized in the system.
HT306TQ-A2_DMARLLK_ENG_5787.indd 20
2012-04-19 �� 9:22:07