14
Installation
Ins
talla
tion
3
Connections to Your
TV
Make one of the following connections,
depending on the capabilities of your existing
equipment.
• Antenna connection (page 14)
• HDMI connection (page 15)
• Component Video connection (page 16)
• Composite connection (page 16)
• Scart connection (page 17)
NOTE
• Depending on your TV and other equipment
you wish to connect, there are various ways
you could connect the unit. Use only one of the
connections described in this manual.
• Please refer to the manuals of your TV, Stereo
System or other devices as necessary to make
the best connections.
• Make sure the player is connected directly to
the TV. Tune the TV to the correct video input
channel.
• Do not connect the player’s AUDIO OUT jack to
the phono in jack (record player) of your audio
system.
• Do not connect your player via your VCR. The
image could be distorted by the copy protection
system.
Antenna connection to your TV
and this unit
Connect one end of the RF cable to ANTENNA
OUT(TO TV) jack on the unit and other end to
ANTENNA IN jack on your TV. Passes the signal
from the ANTENNA IN jack to your TV/monitor.
Connect the CATV line or Terrestrial TV antenna
to the ANTENNA IN jack on the unit. If you
want to use an indoor antenna, use one with
a signal amplifier rated at 5V, 100mA and set
[Antenna 5V] to [ON] in the setup menu (See
page 32).
Antenna Connection
Rear of this unit
TV
3
Installation
ANTENNA
RF Cable
CABLE
Outlet
OR