Operating Instructions
CHAOS Air economizes power consumption and prevents overcooling. The fan speed is automatically
changed from high to low or vice versa, depending on the ambient temperature.
NOTE
This feature is enabled by factory default setting, but you can disable it by pressing the
ON/OFF button for 6 seconds. The unit will beep twice and the indicator lamp(2) will blink 4
times.
To enable it, press the button again for 6 seconds. The unit will beep twice and the indicator
lamp(1) will blink 4 times.
NOTE
Air Circulation Mode
This function is useful in the situation of power failure.
When power regains after a failure this feature restore the previous operating condition
and the air conditioner will run in the same settings.
Auto Restart Function
15
Owner’s Manual
MODE
This operation circulates the air without cooling or heating. It can
be activated by pressing the OPERATION MODE SELECTION
BUTTON. Once the air circulation is activated you can select
the air speed by pressing the INDOOR FAN SPEED SELECTOR
BUTTON.
The Horizontal Vane can be adjusted by using the remote controller.
1. Press the ON/OFF BUTTON to start the unit.
2. Press the vertical airflow direction button.
Each time the button is pressed, the air-flow
direction is changed in the direction of the arrow.
STOP
1 Step
2 Step
3 Step
4 Step
5 Step
6 Step
Auto Swing
Horizontal Vane Control (Optional)
Vertical Vane Control (Optional)
Press the Vertical Airflow Direction button once more during Auto Swing at the direction of airflow you want.
The Vertical Louvers can be adjusted by using the remote controller.
1. Press the ON/OFF BUTTON to start the unit.
2. Press the horizontal airflow direction button. Each time the button is pressed, the
airflow direction is changed in the direction of the arrow.
Press the Horizontal Airflow Direction button once more during Full Auto Swing at the direction of airflow you want.
1 Step
2 Step
3 Step
4 Step
5 Step
Left Auto Swing Right Auto Swing
Full Auto Swing
STOP
• Manually moving the Horizontal Vane or Vertical Louvers by hand could damage the mechanism.When the
unit is shut off, the the Horizontal Vane and Vertical Louvers will close the air outlet vent of the product.
• Air Conditioner memorizes the last operated angle.
So there is possibility of difference in the angle of Remote Controller and the unit after reoperation.
In that case, angle can be adjusted by pressing the
VANE CONTROL BUTTON
on the Remote Controller.
NOTE
SWING
SWING
