26
Installation
Installation
3
Wired Network Setup
Before setting the wired network, you need to
connect the broadband internet to your home
network.
If there is a DHCP server on the local area
network (LAN) via wired connection, this player
will automatically be allocated an IP address.
After making the physical connection, a small
number of home networks may require the
player’s network setting to be adjusted. Adjust
the [NETWORK] setting as follow.
1.
Select [Connection Setting] option in the
[Setup] menu then press ENTER ( ).
2.
Use
U
/
u
/
I
/
i
to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
NOTE
If there is no DHCP server on the network and you
want to set the IP address manually, select [Static]
then set the [IP Address], [Subnet Mask], [Gateway]
and [DNS Server] using
U
/
u
/
I
/
i
and numerical
buttons. If you make a mistake while entering a
number, press CLEAR to clear the highlighted part.
3.
Select [OK] and press ENTER ( ) to apply
network settings.
4.
The player will ask you to test the network
connection. Select [OK] and press ENTER to
complete the network connection.
5.
If you select [Test] and press ENTER at step
4 above, the network connection status is
displayed on the screen.
You can also test it on the [Connection
Status] in the [Setup] menu.
HB905SA-AH.BCANLL_ENG_0406.indd 26
HB905SA-AH.BCANLL_ENG_0406.indd 26
2010.1.30 2:57:5 PM
2010.1.30 2:57:5 PM
