manualshive.com logo in svg

LG GT-8110C, User Manual

Share
Download
LG GT-8110C User Manual Download Page 38

LG Information & Communications, Ltd.

                                                                    

FCC ID: FFMGT8110C

Report # EUT User manual.doc

FCC Part 15 Subpart C Test Report

Page 38 of 32

Blank or faint      

*

*

 Check the contrast control for the display

screen               

see set up your program

                   

*

*

 Check the AC adopter

                      

Be sure that the adapter is not damaged and that it is securely plugged into a working

                      Outlet and the phone jack. Also check that the wall plug is not controlled by a wall

                      switch or a power strip.

                   

*

*

 You might not have received your first call record.

SYMPTOM                            CORRECTIVE ACTION

NO DATA

                          

*

*

 

Check your service

.  Call your local phone company to ensure that you

have

                                               

Caller ID

 or 

Call Waiting ID

 service.

                                               

*

*

 Check the answering machine

.  Ensure that your answering machine is                   

                                            set to answer after two rings.

                                             

*

*

 You answered the call before two rings

.

                                             

*

*

 Check call Forwarding. 

Ensure that Call Forwarding is turned off.

                                            

*

*

 Contact your local phone company’s Service Department

                                           If the problem continues for more than 24 hours.

                                           Your local phone company central office may be

                                           temporarily experiencing an overload.

INCOMPLETE DATA

          

*

*

 Call information was distorted before reaching the unit.

                                           Normal static on the telephone line can cause a line error and an

                                           INCOMPLETE DATA message. If this condition persists, check with your local

                                          telephone company to ensure that there is not a problem with your phone line.

Handset does not               

*

*

 Check that the AC adapter is plugged in and operating correctly.

Charge

.                                

*

*

 Check whether the handset is making contact in the cradle.

PAGE key does                   

*

*

 The handset is not communicating with the base.

not page                             

The handset is either turned off, out of range, or the battery needs recharging.

the handset

Handset does not                

*

*

 Check the AC adapter. 

Be sure that the adapter is not damaged and that

work 

                                 it is securely plugged into a working Outlet and the phone jack.

                                         Also check that the wall plug is not controlled by a wall switch or a power strip.

                                              

*

*

 Verify that the handset is turned on

                                             

*

*

 place the in the cradle for several seconds.

                                             

Ensure the handset is making contact in the cradle.

                                              

*

*

 Recharge the battery.

Summary of Contents for GT-8110C







































Reviews:

No comments

Brands by name

Popular brands

Load more brands